Strictly Fish Wrap

Just another WordPress site

How To Bevel Seadek

Beveling your SeaDek is a great way to add a unique look to your boat deck. There are a few different ways to do this, but we will show you the easiest and most effective way to get the perfect bevel every time. First, you will need to gather a few supplies including a straight edge, a utility knife, and a piece of sandpaper.

  • Use a sharp knife to score the edges of the seadek
  • Use a file or sandpaper to smooth out the scored edges
  • Use a router or other tool to create a beveled edge on the seadek

Rout EVA foam Like a BOSS, by hand DIY

What do you cut SeaDek with?

If you need to cut SeaDek, you will need a sharp knife or razor blade. You can use a straight edge to help guide your cuts. If you are cutting a large piece, it is best to use a power saw.

Always wear safety goggles when cutting SeaDek.

Can you route SeaDek?

If you’re looking to add some personality to your boat, custom SeaDek flooring is a great way to do it! SeaDek is a closed-cell EVA material that is UV resistant and non-absorbent. It’s easy to clean and maintain, and it comes in a variety of colors and textures.

You can even have it custom routed to create a unique look for your boat. So, if you’re wondering “can you route SeaDek?” the answer is a resounding yes!

How do you make homemade SeaDek?

If you’re a boat owner, chances are you’ve heard of SeaDek. This patented, closed-cell EVA foam material is commonly used as a decking material on boats, but it’s also great for a variety of other uses. Here’s a quick guide on how to make your own SeaDek at home.

The first step is to gather your materials. You’ll need a sheet of EVA foam, a spray adhesive, a sharp knife, and a cutting board. You can find EVA foam sheets at most craft stores, or online.

Next, cut the EVA foam to size. It’s important to use a sharp knife and a cutting board to avoid damaging the foam. Once the foam is cut to size, spray one side with the adhesive.

Then, position the foam on the desired surface and press it down. For best results, let the adhesive dry for 24 hours before using the SeaDek. That’s it!

You’ve now made your own SeaDek.

Does SeaDek get hot in the sun?

Seadek is a closed cell EVA material that will not absorb water. It will not get hot in the sun because it is not absorbing the sun’s rays.

how to bevel seadek


Diy seadek

When it comes to do-it-yourself (DIY) projects, there is a lot of debate on whether or not they are worth the time and effort. Some people believe that DIY projects can save you money, while others think that the time and effort it takes to complete them is not worth the savings. So, what about DIY seadek?

Is it worth the time and effort? There are a few things to consider when trying to determine if DIY seadek is worth your time and effort. The first is the cost of the materials.

Seadek is not an inexpensive material, so if you are looking to save money, DIY seadek may not be the best option. The second thing to consider is the time it will take to complete the project. Seadek is not a quick or easy material to work with.

It takes time to cut, sand, and install. If you are short on time, DIY seadek may not be the best option. The third thing to consider is the level of difficulty.

Seadek is not a difficult material to work with, but it is not the easiest either. If you are not experienced with working with this type of material, it may be best to leave the project to someone who is. So, what is the verdict?

Is DIY seadek worth your time and effort? The answer may depend on your individual situation.

How to order seadek

If you’re looking for a way to add some extra flair to your boat, then you might want to consider ordering seadek. Seadek is a type of foam material that can be used to create custom flooring and other boat accessories. It’s easy to work with and relatively inexpensive, so it’s a great option for boat owners who want to add a personal touch to their vessel.

The first step in ordering seadek is to decide what colors and patterns you want. There are a wide variety of options available, so you should be able to find something that suits your taste. Once you’ve made your selections, you’ll need to take measurements of your boat so that you can place your order.

When you’re ready to place your order, you can do so online or over the phone. Most companies that sell seadek will accept major credit cards, so you should have no problem paying for your purchase. Once your order is placed, it will typically take a few weeks for your seadek to arrive.

Once it arrives, you can then begin the process of installing it on your boat. This is relatively easy to do, although you may want to seek out some professional help if you’re not confident in your abilities. Once it’s installed, you’ll be able to enjoy your new flooring or other boat accessory for years to come.

Seadek rolls

If you’re like most people, your boat probably didn’t come with much in the way of non-skid. And even if it did, after a few years of use (and abuse) it’s probably not doing much to keep you from taking a header on the deck when things get wet. That’s where SeaDek comes in.

SeaDek is a closed-cell EVA foam material that is specifically designed for use on boat decks and other wet surfaces. It’s comfortable to walk on, even barefoot, and it provides an exceptional level of traction, even when things are wet. It’s also easy to clean and maintain, and it won’t fade or deteriorate over time.

Best of all, SeaDek can be custom cut to fit just about any boat deck, and it’s available in a wide variety of colors and textures to suit your style. So if you’re looking for a way to improve the look, feel, and safety of your boat, SeaDek is definitely worth checking out.


Beveling your SeaDek is a great way to add a custom touch to your boat deck. There are a few different ways to do this, but we recommend using a router with a beveling bit. This will give you a clean, even bevel that looks great.

First, you’ll need to mark out the area you want to bevel. We recommend using a pencil or chalk to do this. Then, set up your router with a beveling bit and adjust the depth so that it’s shallow enough to not go all the way through the SeaDek.

Now you’re ready to start beveling! Rout around the perimeter of the area you marked out, being careful to keep the router level. Once you’re done, you’ll have a nice, clean beveled edge on your SeaDek.

Back to top