Strictly Fish Wrap

Just another WordPress site

How To Rig A Gotcha Plug

Rigging a gotcha plug is simple once you know how. The first step is to find a suitable location. You’ll need to be able to cast from the shore, so look for a spot with clear access to the water.

You’ll also need to make sure there are no obstacles in the way, such as trees or rocks. Once you’ve found the perfect spot, it’s time to rig your gotcha plug. Attach your fishing line to the eyelet at the front of the plug.

Then, run the line through the body of the plug and out the back. Tie a small loop in the end of the line, and thread on a small barrel swivel. Finally, attach a leader of about 2-3 feet in length.

You’re now ready to start fishing!

  • first, find a gotcha plug that is the right size and shape for the fish you are targeting
  • next, thread your line through the eye of the gotcha plug, and tie a knot to secure it
  • then, attach a swivel to the other end of the line, and tie a leader to the swivel
  • finally, bait your gotcha plug with the appropriate bait for the fish you are targeting, and cast it out into the water

Gotcha Plug hook replacement/ how to replace hooks on gotcha lures/ how to rewire a gotcha lure

How do you jig a Gotcha plug?

There are a few different ways that you can jig a Gotcha plug, but one of the most effective is to use a slow and steady retrieve. This will allow the Gotcha plug to swim in a side-to-side motion, which is incredibly effective in attracting fish. You can also use a faster retrieve, but this is often less effective.

What fish can you catch with a Gotcha plug?

There are a variety of fish that can be caught with a Gotcha plug, including but not limited to: pompano, whiting, croaker, flounder, trout, and redfish. Each of these fish have different ideal conditions in which they bite, so it is important to do your research before heading out on your fishing trip. For example, pompano typically bite best in sandy areas with clear water and a moderate amount of waves.

Whiting, on the other hand, prefer areas with a hard bottom and moderate currents. When fishing for any of these species with a Gotcha plug, it is important to use the proper technique. For pompano, many anglers use a slow retrieve with an occasional twitch, as this imitates a small crab or shrimp.

When fishing for whiting, a faster retrieve is often used, as they are typically chasing baitfish. For croaker, flounder, and trout, a slow and steady retrieve is often most successful, as these fish are typically found near the bottom of the water column. Redfish will often go after a bait that is being rapidly retrieved, so this is a good technique to use when targeting these fish.

regardless of the species you are targeting, it is important to pay attention to the action of your Gotcha plug. Many times, a fish will strike at the plug even if they are not actively feeding.

Can you troll a Gotcha plug?

Yes, you can troll a Gotcha plug. The Gotcha plug is a type of fishing lure that is designed to mimic the appearance and movement of a small fish. It is often used to target larger fish, such as bass, that are feeding on smaller baitfish.

When trolling, the Gotcha plug is typically cast behind the boat and then retrieved at a slow, steady pace. This action can often trigger a strike from a fish that is following the lure.

What are Gotcha lures good for?

There are many different types of fishing lures on the market, each designed for a specific purpose. Gotcha lures are one type of lure that is often used for saltwater fishing. They are designed to mimic the appearance and movement of small baitfish, making them attractive to predators such as tuna, mackerel, and billfish.

Gotcha lures are typically made from plastic or metal and are fitted with multiple hooks. They come in a variety of colors and sizes, and can be rigged in a number of different ways. When used properly, Gotcha lures can be extremely effective at attracting fish and helping anglers to land a big catch.

how to rig a gotcha plug


How to make a gotcha plug

If you’re looking for a fun and easy project that you can do at home, why not try making your own gotcha plugs? With just a few supplies and a little bit of time, you can create your own unique plugs that will add personality to any outfit. Here’s what you’ll need to get started:

-Pencil -Ruler or measuring tape -Scissors

-Paper -Gotcha plug template (downloadable online or create your own) -1 sheet of craft foam

-1 sheet of felt -1 sheet of vinyl -Hot glue gun and glue sticks

-Decorative beads, sequins, or other embellishments (optional) First, use the pencil and ruler to measure and cut out a rectangle of paper that is the same size as the gotcha plug template. Then, use the template to trace and cut out two identical shapes from the craft foam.

Next, cut a small hole in the center of each foam shape. Now it’s time to decorate your gotcha plugs! If you’re using the downloadable template, you’ll notice that there are two different sides – the front and the back.

The front is where you’ll add your decorative embellishments, so have fun with it and be creative! You can glue on beads, sequins, or anything else you can think of.

Gotcha plug leader

If you’ve ever gone fishing, you know that one of the most important things is to have a good hook. But what’s even more important is having a good leader. The leader is the part of the line that’s attached to the hook, and it’s what ensures that your hook stays where you want it.

There are a lot of different types of leaders, but one of the most popular is the Gotcha plug leader. This leader is made of a clear monofilament material, and it’s designed to be used with plugs. It’s a great choice for anglers who want to fish in clear water, because the clear material makes it almost invisible to fish.

The Gotcha plug leader is also very strong, so it can handle a lot of wear and tear. And if you do happen to break it, it’s easy to replace. Just tie on a new leader and you’re good to go.

So if you’re looking for a leader that’s strong, invisible, and easy to use, the Gotcha plug leader is a great choice. Give it a try the next time you’re out fishing, and see for yourself how well it works.

How to change hooks on a gotcha plug

If you’re looking to change the hooks on your gotcha plug, there are a few things you’ll need to do. First, you’ll need to select the new hooks you want to use. There are a variety of hooks available on the market, so be sure to select ones that will work well with the type of fish you’re targeting.

Next, you’ll need to remove the old hooks from the gotcha plug. This can be done by carefully twisting and pulling them out. Once the old hooks are removed, you can simply thread the new hooks into the holes.

Finally, you’ll need to test the gotcha plug to make sure the new hooks are securely in place. Once you’re satisfied, you can put the plug back into your tackle box and get ready for your next fishing adventure!


If you’re looking to add a little extra excitement to your fishing, rigging a gotcha plug is a great way to do it. These plugs are designed to mimic the movements of a wounded baitfish, and they’re irresistible to predators. Here’s how to rig one up:

1. Start by threading your line through the plug’s eyelet. 2. Next, tie a loop in the line just behind the plug. 3. Then, thread the loop through the plug’s nose.

4. Finally, tie a knot in the line to secure the plug in place. Gotcha plugs are a great way to add some action to your presentation. By mimicking the movements of a wounded baitfish, they can trigger strikes from even the most reluctant fish.

Give them a try the next time you’re on the water!

Back to top