How To Take Apart A Zebco 33 Fishing Reel

How To Take Apart A Zebco 33 Fishing Reel

Whether you’re cleaning your reel or fixing a broken part, knowing how to take your Zebco 33 fishing reel apart is a handy skill to have. Here’s a step-by-step guide on how to do it: First, unscrew the handle from the reel.

To do this, locate the small knob at the base of the handle and unscrew it counterclockwise. Once the knob is removed, the handle should come right off. Next, use a Phillips head screwdriver to remove the screws that hold the side plate in place.

There are usually three screws, two on the top and one on the bottom. With the screws removed, the side plate should come off easily. Now you should be able to see the inner workings of the reel.

There are a few different parts that you may need to remove depending on what you’re trying to do. For example, the spool can be removed by unscrewing the spool release knob. The final step is to reassemble the reel in the reverse order.

Start by screwing the side plate back on, followed by the handle. Make sure the handle is tight so it doesn’t come loose while you’re fishing. That’s all there is to it!

With a little practice, you’ll be able to take your Zebco 33 reel apart and put it back together in no time.

  • Unscrew the handle of the reel
  • Unscrew the spool
  • Take out the spool
  • Take out the bail wire
  • Take out the anti-reverse pawl
  • Take out the drag knob
  • Take out the drag washer
  • Take out the main gear
  • Take out the level wind system

How to Service a Reel: Zebco 33 Authentic

How do you take a Zebco reel apart?

If you’re new to fishing, you may not know how to take a Zebco reel apart. Here’s a quick guide on how to do it. First, unscrew the handle from the reel.

Then, remove the spool by unscrewing the nut that holds it in place. Once the spool is removed, you’ll be able to see the gears inside the reel. To take these out, simply unscrew the screws that hold them in place.

Now that you have the gears out, you can clean them and lubricate them if needed. To put the reel back together, simply follow the steps in reverse. That’s all there is to it!

With a little practice, you’ll be able to take a Zebco reel apart and put it back together in no time.

How do you open an old Zebco 33 reel?

If you’re lucky enough to have an old Zebco 33 reel, you may be wondering how to open it. The good news is that it’s not difficult, and with a little bit of patience, you can get it open and take a look at the internals. The first thing you’ll need to do is locate the two screws on the side of the reel.

These screws hold the sideplate in place, and you’ll need to remove them in order to get the sideplate off. Once the screws are removed, the sideplate will come off easily. With the sideplate off, you’ll be able to see the spool and the drag knob.

The drag knob is located at the top of the spool, and you’ll need to unscrew it in order to remove the spool. Once the spool is removed, you can take a look at the internals of the reel. The internals of the reel are pretty simple, and there’s not much to see.

However, if you’re having trouble getting the reel open, you can always consult the owner’s manual. With a little bit of patience, you should be able to get your old Zebco 33 reel open and take a look at the internals.

How do you service a Zebco 33 reel?

Zebco 33 reels are one of the most popular fishing reels on the market. They are known for their durability and ease of use. servicing a Zebco 33 reel is a fairly simple process that can be done at home with a few tools.

To service a Zebco 33 reel, you will need: -A screwdriver -A pair of pliers

-A small brush -Some lubricant First, you will need to unscrew the back cover of the reel using the screwdriver.

Once the back cover is off, you can remove the spool by pulling it out. Be careful not to lose any of the small parts that may fall out when you remove the spool. Next, use the brush to clean out any dirt or debris that may have accumulated inside the reel.

Once the reel is clean, you can lubricate the gears with a few drops of lubricant. Be sure to wipe away any excess lubricant before reassembling the reel. To reassemble the reel, simply reverse the steps you took to disassemble it.

Once the reel is back together, you can screw on the back cover and test it out. If you’re having trouble servicing your Zebco 33 reel, there are plenty of resources available online or at your local fishing store.

How do you disassemble a Zebco 33 Rhino tough?

Assuming you are talking about the Zebco 33 Rhino Tough spinning reel, here are instructions for taking it apart: 1. To start, remove the screw located on the back of the reel using a Phillips head screwdriver. 2. Next, remove the spool by unscrewing the nut located at the center of the spool.

3. With the spool removed, you will be able to see the drag washers. There are two drag washers, a top and a bottom. To remove the top drag washer, simply unscrew the nut that is holding it in place.

To remove the bottom drag washer, you will need to first remove the bail wire. To do this, unscrew the two screws that are holding the bail wire in place. With the bail wire removed, the bottom drag washer can now be removed.

4. The next step is to remove the bearings. There are four bearings in total, two on the top and two on the bottom. To remove the top bearings, simply unscrew the two nuts that are holding them in place.

To remove the bottom bearings, you will need to first remove the gears. To do this, unscrew the three screws that are holding the gears in place. With the gears removed, the bottom bearings can now be removed.

5. The final step is to remove the handle.

how to take apart a zebco 33 fishing reel

Credit: goneoutdoors.com

Zebco 33 repair manual

If you need to repair your Zebco 33 fishing reel, you can find a repair manual online. This manual will provide you with step-by-step instructions on how to properly disassemble and reassemble your reel. It will also provide you with troubleshooting tips in case you run into any problems.

With this manual, you should be able to easily repair your Zebco 33 fishing reel.

Zebco 33 reel diagram

If you’re an angler, then you know all about the Zebco 33 reel. This reel is one of the most popular fishing reels on the market, and for good reason. It’s simple to use, yet extremely effective.

Plus, it’s affordable, which makes it a great option for anglers of all levels of experience. But what exactly is a Zebco 33 reel? And how does it work?

Let’s take a closer look. A Zebco 33 reel is a spinning reel that is designed for use with baitcasting rods. It features a large spool that can hold a lot of line, making it ideal for use with live bait or lures.

The reel also has a smooth, consistent drag system that helps you control your line when you’re fighting a fish. To use a Zebco 33 reel, simply attach it to your baitcasting rod and line it up with your target. When you cast your line, the reel will automatically engage and begin spinning.

This action will help to keep your line tight and prevent it from tangling. If you’re looking for a versatile and affordable reel, then the Zebco 33 is a great option. It’s simple to use and can be a great asset when you’re out on the water.

Zebco 33 maintenance

If you own a Zebco 33, you know that it’s a great reel for fishing. But like any reel, it needs to be properly maintained in order to keep it in good working condition. Here are some tips on how to maintain your Zebco 33:

– Oil the reel after each use. This will help keep the gears lubricated and working smoothly. – Clean the reel after each use.

This will help remove any salt or sand that could potentially damage the reel. – Store the reel in a dry, cool place when not in use. This will help prevent the reel from rusting.

By following these simple tips, you can help keep your Zebco 33 in good working condition for many years to come.

Conclusion

If you need to take apart your Zebco 33 fishing reel for any reason, it’s not difficult to do. You’ll need a Phillips head screwdriver and a small flathead screwdriver. First, remove the spool by unscrewing the retaining nut with the Phillips head screwdriver.

With the spool off, you can unscrew the drag knob with the flathead screwdriver. Next, unscrew the main gear cover with the Phillips head screwdriver. Be careful not to lose the small spring that’s under the cover.

Once the cover is off, you can remove the main gear, washer, and bail wire. To put it back together, just reverse the process.


6 responses to “How To Take Apart A Zebco 33 Fishing Reel”

Leave a Reply

Your email address will not be published.